Aftermarket Top-Hat / Hanger Assembly

I have an aftermarket top-hat/hanger assembly for multiple, stock-style in-tank pumps.  I’d like to use several 340 Stealth Pumps with this hanger, will it work okay?

Using multiple 340 Stealth pumps is best limited to 2-pump hanger assemblies, providing 680 lph or about 1,000+ lb/hr at 43 PSI and 13.5 volts. Few OEM tanks have sufficient baffling to sustain this flow for more than short bursts, risking lean-out when the tank is half-full or lower. Proper wiring is critical: each pump draws 15 amps at 60 PSI (30 amps for two, 45 amps for three), increasing at higher pressures (up to 19 amps per pump at 90 PSI). Heavy-duty electrical components are required.

If fuel demands exceed two 340 Stealth pumps, Aeromotive recommends upgrading to a single larger pump, such as the Eliminator or Pro-Series for extreme applications.